Silk Protein Paper with In Situ Synthesized Silver Nanoparticles.

Silver nanoparticles (AgNPs) are in situ synthesized for the first time on microfibrillated silk (MFS) exfoliated from domesticated Philosamia cynthia ricini (eri) and Bombyx mori (mulberry) silkworm silk fibers. The process is rapid (hours time), does not rely on harmful chemicals, and produces robust and flexible AgNPs coated MFS (MFS-AgNPs) protein papers with excellent handling properties. None of these can be achieved by approaches used in the past to fabricate AgNPs silk systems. MFS bonds the AgNPs strongly, providing good support and stabilization for the NPs, leading to strong wash fastness. The mechanical properties of the MFS-AgNPs papers largely do not change compared to the MFS papers without nanoparticles, except for some higher concentration of AgNPs in the case of mulberry silk. The improved tensile properties of eri silk papers with or without AgNPs compared to mulberry silk papers can be attributed to the higher degree of fibrillation achieved in eri silk and its inherent higher ductility. MFS-AgNPs from eri silk also exhibit strong antibacterial activity. This study provides the basis for the development of smart protein papers based on silk fiber and functional nanomaterials.

Structure of native glycolipoprotein filaments in honeybee royal jelly.

Royal jelly (RJ) is produced by honeybees (Apis mellifera) as nutrition during larval development. The high viscosity of RJ originates from high concentrations of long lipoprotein filaments that include the glycosylated major royal jelly protein 1 (MRJP1), the small protein apisimin and insect lipids. Using cryo-electron microscopy we reveal the architecture and the composition of RJ filaments, in which the MRJP1 forms the outer shell of the assembly, surrounding stacked apisimin tetramers harbouring tightly packed lipids in the centre. The structural data rationalize the pH-dependent disassembly of RJ filaments in the gut of the larvae.

NEXAFS imaging to characterize the physio-chemical composition of cuticle from African Flower Scarab Eudicella gralli.

The outermost surface of insect cuticle is a high-performance interface that provides wear protection, hydration, camouflage and sensing. The complex and inhomogeneous structure of insect cuticle imposes stringent requirements on approaches to elucidate its molecular structure and surface chemistry. Therefore, a molecular understanding and possible mimicry of the surface of insect cuticle has been a challenge. Conventional optical and electron microscopies as well as biochemical techniques provide information about morphology and chemistry but lack surface specificity. We here show that a near edge X-ray absorption fine structure microscope at the National Synchrotron Light Source can probe the surface chemistry of the curved and inhomogeneous cuticle of the African flower scarab. The analysis shows the distribution of organic and inorganic surface species while also hinting at the presence of aragonite at the dorsal protrusion region of the Eudicella gralli head, in line with its biological function.

Structural basis for the modulation of voltage-gated sodium channels by animal toxins.

Animal toxins that modulate the activity of voltage-gated sodium (Nav) channels are broadly divided into two categories-pore blockers and gating modifiers. The pore blockers tetrodotoxin (TTX) and saxitoxin (STX) are responsible for puffer fish and shellfish poisoning in humans, respectively. Here, we present structures of the insect Nav channel NavPaS bound to a gating modifier toxin Dc1a at 2.8 angstrom-resolution and in the presence of TTX or STX at 2.6-Å and 3.2-Å resolution, respectively. Dc1a inserts into the cleft between VSDII and the pore of NavPaS, making key contacts with both domains. The structures with bound TTX or STX reveal the molecular details for the specific blockade of Na+ access to the selectivity filter from the extracellular side by these guanidinium toxins. The structures shed light on structure-based development of Nav channel drugs.

High diversity in neuropeptide immunoreactivity patterns among three closely related species of Dinophilidae (Annelida).

Neuropeptides are conserved metazoan signaling molecules, and represent useful markers for comparative investigations on the morphology and function of the nervous system. However, little is known about the variation of neuropeptide expression patterns across closely related species in invertebrate groups other than insects. In this study, we compare the immunoreactivity patterns of 14 neuropeptides in three closely related microscopic dinophilid annelids (Dinophilus gyrociliatus, D. taeniatus and Trilobodrilus axi). The brains of all three species were found to consist of around 700 somata, surrounding a central neuropil with 3-5 ventral and 2-5 dorsal commissures. Neuropeptide immunoreactivity was detected in the brain, the ventral cords, stomatogastric nervous system, and additional nerves. Different neuropeptides are expressed in specific, non-overlapping cells in the brain in all three species. FMRFamide, MLD/pedal peptide, allatotropin, RNamide, excitatory peptide, and FVRIamide showed a broad localization within the brain, while calcitonin, SIFamide, vasotocin, RGWamide, DLamide, FLamide, FVamide, MIP, and serotonin were present in fewer cells in demarcated regions. The different markers did not reveal ganglionic subdivisions or physical compartmentalization in any of these microscopic brains. The non-overlapping expression of different neuropeptides may indicate that the regionalization in these uniform, small brains is realized by individual cells, rather than cell clusters, representing an alternative to the lobular organization observed in several macroscopic annelids. Furthermore, despite the similar gross brain morphology, we found an unexpectedly high variation in the expression patterns of neuropeptides across species. This suggests that neuropeptide expression evolves faster than morphology, representing a possible mechanism for the evolutionary divergence of behaviors.

Biophysical and biological characterisation of collagen/resilin-like protein composite fibres.

Collagen type I, in various physical forms, is widely used in tissue engineering and regenerative medicine. To control the mechanical properties and biodegradability of collagen-based devices, exogenous cross-links are introduced into the 3D supramolecular structure. However, potent cross-linking methods are associated with cytotoxicity, whilst mild cross-linking methods are associated with suboptimal mechanical resilience. Herein, we assessed the influence of resilin, a super-elastic and highly stretchable protein found within structures in arthropods where energy storage and long-range elasticity are needed, on the biophysical and biological properties of mildly cross-linked extruded collagen fibres. The addition of resilin-like protein in the 4-arm poly(ethylene glycol) ether tetrasuccinimidyl glutarate cross-linked collagen fibres resulted in a significant increase of stress and strain at break values and a significant decrease of modulus values. The addition of resilin-like protein did not compromise cell metabolic activity and DNA concentration. All groups are supported parallel to the longitudinal fibre axis cell orientation. Herein we provide evidence that the addition of resilin-like protein in mildly cross-linked collagen fibres improves their biomechanical properties, without jeopardising their biological properties.

The molecular structure of the silk fibers from Hymenoptera aculeata (bees, wasps, ants).

Silks from the Hymenoptera aculeata (bees, wasps, ants) contain ropes with four α-helical strands, rather than the more usual two strands found, for example, in α-keratin and myosin molecules. Extensive studies of the chemical structure of the silks have shown that each of the four chains in the molecule contains a central coiled-coil rod domain. However, little progress has been made in modeling the three-dimensional structure. X-ray diffraction data on honeybee silk (Apis mellifera), recorded by Rudall and coworkers, has been re-examined in detail and possible structures developed for the various types of filament seen in the silk glands, and for the packing arrangement in the spun fibers. The original X-ray data were re-collected by scanning figures in the original publications, de-screening and averaging perpendicular to the direction of interest, thereby reducing the graininess of the original images. Sufficient numbers of equatorial and meridional reflections were collected to define the axial projection of the base of the unit cell in fibers drawn from the contents of the silk glands, and to suggest that the axial period is different from that suggested by Rudall and coworkers. Models for two types of filament of increasing diameter are developed based on the node-internode packing scheme observed in protein crystals containing four-strand α-helical ropes. The central domains of the four component chains in the molecule are enclosed by N- and C-terminal domains with widely different lengths and compositions. The fibers thus have a composite filament-matrix texture, and possible locations for the matrix are discussed.

Tribolium castaneum RR-1 cuticular protein TcCPR4 is required for formation of pore canals in rigid cuticle.

Insect cuticle is composed mainly of structural proteins and the polysaccharide chitin. The CPR family is the largest family of cuticle proteins (CPs), which can be further divided into three subgroups based on the presence of one of the three presumptive chitin-binding sequence motifs denoted as Rebers-Riddiford (R&R) consensus sequence motifs RR-1, RR-2 and RR-3. The TcCPR27 protein containing the RR-2 motif is one of the most abundant CPs present both in the horizontal laminae and in vertical pore canals in the procuticle of rigid cuticle found in the elytron of the red flour beetle, Tribolium castaneum. Depletion of TcCPR27 by RNA interference (RNAi) causes both unorganized laminae and pore canals, resulting in malformation and weakening of the elytron. In this study, we investigated the function(s) of another CP, TcCPR4, which contains the RR-1 motif and is easily extractable from elytra after RNAi to deplete the level of TcCPR27. Transcript levels of the TcCPR4 gene are dramatically increased in 3 d-old pupae when adult cuticle synthesis begins. Immunohistochemical studies revealed that TcCPR4 protein is present in the rigid cuticles of the dorsal elytron, ventral abdomen and leg but not in the flexible cuticles of the hindwing and dorsal abdomen of adult T. castaneum. Immunogold labeling and transmission electron microscopic analyses revealed that TcCPR4 is predominantly localized in pore canals and regions around the apical plasma membrane protrusions into the procuticle of rigid adult cuticles. RNAi for TcCPR4 resulted in an abnormal shape of the pore canals with amorphous pore canal fibers (PCFs) in their lumen. These results support the hypothesis that TcCPR4 is required for achieving proper morphology of the vertical pore canals and PCFs that contribute to the assembly of a cuticle that is both lightweight and rigid.

Atomic resolution structure of a protein prepared by non-enzymatic His-tag removal. Crystallographic and NMR study of GmSPI-2 inhibitor.

Purification of suitable quantity of homogenous protein is very often the bottleneck in protein structural studies. Overexpression of a desired gene and attachment of enzymatically cleavable affinity tags to the protein of interest made a breakthrough in this field. Here we describe the structure of Galleria mellonella silk proteinase inhibitor 2 (GmSPI-2) determined both by X-ray diffraction and NMR spectroscopy methods. GmSPI-2 was purified using a new method consisting in non-enzymatic His-tag removal based on a highly specific peptide bond cleavage reaction assisted by Ni(II) ions. The X-ray crystal structure of GmSPI-2 was refined against diffraction data extending to 0.98 Å resolution measured at 100 K using synchrotron radiation. Anisotropic refinement with the removal of stereochemical restraints for the well-ordered parts of the structure converged with R factor of 10.57% and Rfree of 12.91%. The 3D structure of GmSPI-2 protein in solution was solved on the basis of 503 distance constraints, 10 hydrogen bonds and 26 torsion angle restraints. It exhibits good geometry and side-chain packing parameters. The models of the protein structure obtained by X-ray diffraction and NMR spectroscopy are very similar to each other and reveal the same ß2αß fold characteristic for Kazal-family serine proteinase inhibitors.

The major cockroach allergen Bla g 4 binds tyramine and octopamine.

Bla g 4 is a male cockroach specific protein and is one of the major allergens produced by Blattella germanica (German cockroach). This protein belongs to the lipocalin family that comprises a set of proteins that characteristically bind small hydrophobic molecules and play a role in a number of processes such as: retinoid and pheromone transport, prostaglandin synthesis and mammalian immune response. Using NMR and isothermal titration calorimetry we demonstrated that Bla g 4 binds tyramine and octopamine in solution. In addition, crystal structure analysis of the complex revealed details of tyramine binding. As tyramine and octopamine play important roles in invertebrates, and are counterparts to vertebrate adrenergic transmitters, we speculate that these molecules are physiological ligands for Bla g 4. The nature of binding these ligands to Bla g 4 sheds light on the possible biological function of the protein. In addition, we performed a large-scale analysis of Bla g 4 and Per a 4 (an allergen from American cockroach) homologs to get insights into the function of these proteins. This analysis together with a structural comparison of Blag 4 and Per a 4 suggests that these proteins may play different roles and most likely bind different ligands. Accession numbers: The atomic coordinates and the structure factors have been deposited to the Protein Data Band under accession codes: 4N7C for native Bla g 4 and 4N7D for the Se-Met Bla g 4 structure.

Subunit positioning and stator filament stiffness in regulation and power transmission in the V1 motor of the Manduca sexta V-ATPase.

The vacuolar H(+)-ATPase (V-ATPase) is an ATP-driven proton pump essential to the function of eukaryotic cells. Its cytoplasmic V1 domain is an ATPase, normally coupled to membrane-bound proton pump Vo via a rotary mechanism. How these asymmetric motors are coupled remains poorly understood. Low energy status can trigger release of V1 from the membrane and curtail ATP hydrolysis. To investigate the molecular basis for these processes, we have carried out cryo-electron microscopy three-dimensional reconstruction of deactivated V1 from Manduca sexta. In the resulting model, three peripheral stalks that are parts of the mechanical stator of the V-ATPase are clearly resolved as unsupported filaments in the same conformations as in the holoenzyme. They are likely therefore to have inherent stiffness consistent with a role as flexible rods in buffering elastic power transmission between the domains of the V-ATPase. Inactivated V1 adopted a homogeneous resting state with one open active site adjacent to the stator filament normally linked to the H subunit. Although present at 1:1 stoichiometry with V1, both recombinant subunit C reconstituted with V1 and its endogenous subunit H were poorly resolved in three-dimensional reconstructions, suggesting structural heterogeneity in the region at the base of V1 that could indicate positional variability. If the position of H can vary, existing mechanistic models of deactivation in which it binds to and locks the axle of the V-ATPase rotary motor would need to be re-evaluated.

Evidence of α-helical coiled coils and ß-sheets in hornet silk.

α-Helical coiled coil and ß-sheet complexes are essential structural building elements of silk proteins produced by different species of the Hymenoptera. Beside X-ray scattering at wide and small angles we applied cryo-electron diffraction and microscopy to demonstrate the presence and the details of such structures in silk of the giant hornet Vespa mandarinia japonica. Our studies on the assembly of the fibrous silk proteins and their internal organization in relation to the primary chain structure suggest a 172 Å pitch supercoil consisting of four intertwined alanine-rich α-helical strands. The axial periodicity may adopt even multiples of the pitch value. Coiled coil motifs form the largest portion of the hornet silk structure and are aligned nearly parallel to the cocoon fiber axis in the same way as the membrane-like parts of the cocoon are molecularly orientated in the spinning direction. Supercoils were found to be associated with ß-crystals, predominantly localized in the l-serine-rich chain sequences terminating each of the four predominant silk proteins. Such ß-sheet blocks are considered resulting from transformation of random coil molecular sequences due to the action of elongational forces during the spinning process.

Fabrication and characterization of biomaterial film from gland silk of muga and eri silkworms.

This study discusses the possibilities of liquid silk (Silk gland silk) of Muga and Eri silk, the indigenous non mulberry silkworms of North Eastern region of India, as potential biomaterials. Silk protein fibroin of Bombyx mori, commonly known as mulberry silkworm, has been extensively studied as a versatile biomaterial. As properties of different silk-based biomaterials vary significantly, it is important to characterize the non mulberry silkworms also in this aspect. Fibroin was extracted from the posterior silk gland of full grown fifth instars larvae, and 2D film was fabricated using standard methods. The films were characterized using SEM, Dynamic contact angle test, FTIR, XRD, DSC, and TGA and compared with respective silk fibers. SEM images of films reveal presence of some globules and filamentous structure. Films of both the silkworms were found to be amorphous with random coil conformation, hydrophobic in nature, and resistant to organic solvents. Non mulberry silk films had higher thermal resistance than mulberry silk. Fibers were thermally more stable than the films. This study provides insight into the new arena of research in application of liquid silk of non mulberry silkworms as biomaterials.

Functional expression of a Bombyx mori cocoonase: potential application for silk degumming.

Cocoon, a shelter for larva development to silk moth, contains the fibrous protein fibroin, which is coated by the globular protein sericin. Emergence of the silk moth requires the action of cocoonase, a protease secreted by the pupa. The full-length prococoonase cDNA, with 780 bp open reading frame encoding 260 amino acids, was cloned by reverse transcription from total RNA of the head of 6-day-old Thai-silk Bombyx mori pupa. Only the gene fragment lacking the propeptide encoding sequence was successfully expressed in Pichia pastoris, yielding an extracellularly active cocoonase. The recombinant cocoonase was purified to homogeneity by 80% ammonium-sulfate fractionation and CM-Sepharose chromatography, and its internal peptide sequences were analyzed by nano liquid chromatography-mass spectrometry/mass spectrometry. This monomeric protein has native molecular weight of 26 kDa by gel exclusion analysis and 25 kDa subunit size by sodium dodecyl sulphate-polyacrylamide gel electrophoresis. The enzyme hydrolyses sericin but does not hydrolyse fibroin, as shown by radial diffusion on thin-layer enzyme assay (RD-TEA). Scanning electron microscopy showed that purified recombinant cocoonase could remove sericin from natural silk completely in 24 h, without damaging fibroin, using only 1 immobilized sericin unit (ISU) of enzyme as determined by RD-TEA. Natural cocoonase isolated from B. mori pupa could also digest sericin effectively, but required more enzymes (2 ISU) and longer time (48 h). In comparison, a commercial enzyme, alcalase, with the same activity not only showed less complete digestion of sericin but also caused damage of fibroin. These results suggest that recombinant B. mori cocoonase is potentially useful for silk degumming.

Artificial egg stalks made of a recombinantly produced lacewing silk protein.

Rigid threads: Lacewings protect their eggs from predators by laying them on small stalks (see picture). The stalks have good mechanical properties and, unlike most other silks, a cross ß structure. An artificial egg stalk was produced using a designed recombinant variant of a sequenced lacewing egg stalk protein, and it attained 90 % of the tensile strength of a natural egg stalk.

Shear-induced self-assembly of native silk proteins into fibrils studied by atomic force microscopy.

Noncontact mode atomic force microscopy was used to investigate native silk proteins prepared in different ways. Low protein concentrations revealed that single protein molecules exhibit a simple, round shape with apparent diameters of 20-25 nm. Shearing the native protein solutions after extraction from the gland and prior to drying led to a beads-on-a-string assembly at the nanometer scale. Protein concentration had a significant effect on the morphology of the protein assemblies. At higher protein concentrations, shear-induced alignment into nanofibrils was observed, while lower concentrations lead to the formation of much thinner fibrils with a width of about 8 nm.

Observation of membrane proteins in situ: AQPcic, the insect aquaporin example.

Aquaporins are water-selective channels widely distributed in prokaryotes, plants, and animals. Looking for the presence of a water channel in the filter chamber (FC) of a homopteran insect (Cicadella viridis), we conducted an electron microscopic study. On thin sections, FC displays thin epithelia with developed basal membrane folds (BMFs). Freeze fracture performed on FC shows an amazing network of intramembrane particles. Epithelial cell membranes were purified and observed by negative staining for control purity. Membrane solubilisation followed by PAGE showed that a 25-kDa polypeptide (P25) is the major protein constituent. Using a specific antibody, we located P25 on thin sections on the microvilli and on BMFs of the epithelial cells. Immunogold localisation of P25 on negatively stained membranes and examination of Pt/C shadowed membranes demonstrated that P25 has an asymmetric insertion within the membrane. cDNA cloning and heterologous expression confirmed that P25 is an aquaporin; thus, we called it AQPcic. The native state of crystallisation of this aquaporin in the membrane appeared to be unique and favourable for a structural investigation by negative staining, cryo-electron microscopy, and image processing. We demonstrated that, in the native membrane, AQPcic is a homotetramer forming a regular two-dimensional array.

Patterned rhodopsin expression in R7 photoreceptors of mosquito retina: Implications for species-specific behavior.

Visual perception of the environment plays an important role in many mosquito behaviors. Characterization of the cellular and molecular components of mosquito vision will provide a basis for understanding these behaviors. A unique feature of the R7 photoreceptors in Aedes aegypti and Anopheles gambiae is the extreme apical projection of their rhabdomeric membrane. We show here that the compound eye of both mosquitoes is divided into specific regions based on nonoverlapping expression of specific rhodopsins in these R7 cells. The R7 cells of the upper dorsal region of both mosquitoes express a long wavelength op2 rhodopsin family member. The lower dorsal hemisphere and upper ventral hemisphere of both mosquitoes express the UV-sensitive op8 rhodopsin. At the lower boundary of this second region, the R7 cells again express the op2 family rhodopsin. In Ae. aegypti, this third region is a horizontal stripe of one to three rows of ommatidia, and op8 is expressed in a fourth region in the lower ventral hemisphere. However, in An. gambiae the op2 family member expression is expanded throughout the lower region in the ventral hemisphere. The overall conserved ommatidial organization and R7 retinal patterning show these two species retain similar visual capabilities. However, the differences within the ventral domain may facilitate species-specific visual behaviors.

Isolation, characterisation and molecular imaging of a high-molecular-weight insect biliprotein, a member of the hexameric arylphorin protein family.

The abundant blue hemolymph protein of the last instar larvae of the moth Cerura vinula was purified and characterized by protein-analytical, spectroscopic and electron microscopic methods. Amino acid sequences obtained from a large number of cleavage peptides revealed a high level of similarity of the blue protein with arylphorins from a number of other moth species. In particular, there is a high abundance of the aromatic amino acids tyrosine and phenylalanine amounting to about 19% of total amino acids and a low content of methionine (0.8%) in the Cerura protein. The mass of the native protein complex was studied by size-exclusion chromatography, analytical ultracentrifugation, dynamic light scattering and scanning transmission electron microscopy and found to be around 500 kDa. Denaturating gel electrophoresis and mass spectrometry suggested the presence of two proteins with masses of about 85 kDa. The native Cerura protein is, therefore, a hexameric complex of two different subunits of similar size, as is known for arylphorins. The protein was further characterized as a weakly acidic (pI approximately 5.5) glycoprotein containing mannose, glucose and N-acetylglucosamine in an approximate ratio of 10:1:1. The structure proposed for the most abundant oligosaccharide of the Cerura arylphorin was the same as already identified in arylphorins from other moths. The intense blue colour of the Cerura protein is due to non-covalent association with a bilin of novel structure at an estimated protein subunit-to-ligand ratio of 3:1. Transmission electron microscopy of the biliprotein showed single particles of cylindrical shape measuring about 13 nm in diameter and 9 nm in height. A small fraction of particles of the same diameter but half the height was likely a trimeric arylphorin dissociation intermediate. Preliminary three-dimensional reconstruction based on averaged transmission electron microscopy projections of the individual particles revealed a double-trimeric structure for the hexameric Cerura biliprotein complex, suggesting it to be a dimer of trimers.

Redundant mechanisms recruit actin into the contractile ring in silkworm spermatocytes.

Cytokinesis is powered by the contraction of actomyosin filaments within the newly assembled contractile ring. Microtubules are a spindle component that is essential for the induction of cytokinesis. This induction could use central spindle and/or astral microtubules to stimulate cortical contraction around the spindle equator (equatorial stimulation). Alternatively, or in addition, induction could rely on astral microtubules to relax the polar cortex (polar relaxation). To investigate the relationship between microtubules, cortical stiffness, and contractile ring assembly, we used different configurations of microtubules to manipulate the distribution of actin in living silkworm spermatocytes. Mechanically repositioned, noninterdigitating microtubules can induce redistribution of actin at any region of the cortex by locally excluding cortical actin filaments. This cortical flow of actin promotes regional relaxation while increasing tension elsewhere (normally at the equatorial cortex). In contrast, repositioned interdigitating microtubule bundles use a novel mechanism to induce local stimulation of contractility anywhere within the cortex; at the antiparallel plus ends of central spindle microtubules, actin aggregates are rapidly assembled de novo and transported laterally to the equatorial cortex. Relaxation depends on microtubule dynamics but not on RhoA activity, whereas stimulation depends on RhoA activity but is largely independent of microtubule dynamics. We conclude that polar relaxation and equatorial stimulation mechanisms redundantly supply actin for contractile ring assembly, thus increasing the fidelity of cleavage.